Redesigned By: SAGAR SAPKOTA (contact)
(Original design by sparkfun.com)
This easy to assemble kit gives you all the parts necessary to assemble a serial 16×2 character LCD display. By sending commands over a serial port from your computer or microcontroller, you can display basic text on the included LCD display. The main controller IC comes preprogrammed with both the Arduino bootloader and the serial LCD firmware; all it needs is assembly. Once assembled you can send it commands right away. The kit comes with a white on blue 16×2 LCD display and everything shown in the pictures.
We’ve also broken out all of the ATmega328 pins so you can even use the kit as an Arduino compatible microcontroller. In order to upload new code to the LCD Kit via bootloader you’ll need an FTDI Basic Breakout and have the Board setting in Arduino on ‘Arduino UNO’.
You can purchase this kit at buildcircuit.net
EasyEDA: Ideas for Circuit Design, Innovation for Electronics Access
Free Circuit Design: Schematic - Simulation - PCB Layout - Gerber Viewer
Cheapest PCB Prototype: Only $2 for 10pcs 10×10cm PCBs, 24 hours Quick Turn, DHL Delivery in 3 Days