0
AVRDUDE error on Arduino programmer
Jan 01 in Arduino, circuit-blog.com
Written by: Sagar
While uploading a program on breadboard based arduino programmer, you might have faced an error with the following message:
avrdude: stk500_getsync(): not in sync: resp=0×00avrdude: stk500_getsync(): not in sync: resp=0×00avrdude: stk500_disable(): protocol error, expect=0×14, resp=0×00
You would probably get this error if you make programmer using the direction given on this link:
http://www.arduino.cc/en/Main/Standalone
The error occurs in the absence of a 100Ohm resistor...
