SCORE4- 2 teams/players Arduino based digital scoreboard with 2.3″, 3″ and 4″ displays

US $495.00

The price of this product is not decided yet. We will finalize the price soon. We are still in the R&D phase.

  • 2 players/teams Arduino based digital Scoreboard
  • Programmable using FTDI basic breakout board
  • Available in 3 sizes: 2.3″, 3″ and 4″ displays
  • Works with SCORE4 module of Scoreduino app
  • Send specific numbers to the displays using the app
  • Bluetooth is the communication medium between the Scoreboard and app
  • Can be controlled with 4CH RF remote control
  • Use switches to manually increase or decrease the count
  • 2.3″ scoreboards work with 9V and 3″ and 4″ scoreboards work with 12V.
Clear

Description

The price of this product is not decided yet

Use SCORE4 module of Scoreduino app.

This is a DIY digital scoreboard for indoor games. All the modules of the scoreboard come fully assembled. You just have to find a way to fix it on a wooden board or make other arrangements.

There are 3 modules in each scoreboard:

  1. SCOREDUINO_B: This is the central module of the Scoreboard. This is an Arduino-based controller supported by a Bluetooth module and an RF module for communicating with the 2 digits displays placed on its two sides. Read more about Scoreduino_B.
  2. The right display: The right display gets up and down count commands from the central Scoreduino-B controller. The commands can be sent by RF remote control or SCORE4 module of the Scoreduino app. Specific numbers can also be sent to the right display.
  3. The left display: The left display also gets up and down count commands from the central Scoreduino-B controller. The commands can be sent by RF remote control or SCORE4 module of the Scoreduino app. Specific numbers can also be sent to the left display.

Other supporting modules:

  1. RF receiver and the remote control: It uses the basic 4CH (the videos show 6CH, we sell 4CH only) RF module and remote control to send commands.
  2. Bluetooth module: The scoreboard can be controlled with SCORE4 module of the Scoreduino app and it communicates via Bluetooth.

Power supplies:

  1. 2.3″ Scoreboard works with 9V. NOTE: We use LM7809 chip only for 2.3″ scoreboard.
  2. 3″ and 4″ Scoreboards work with 12V

How does it work?

To understand this working principle of Scoreboard, you need to understand two modules:

  1. SCOREDUINO_B: This is an Arduino based controller that sends up and down commands to up and down counters. The schematic of SCOREDUINO_B.
  2. Single-digit up and down counter module: We have described how 74LS192 based up and down counter modules work. You need to combine two of the single-digit counters and connect them to SCOREDUINO_B. The schematic of single-digit counter.
  3. You can also read about Scoreduino_A.

These are the pins on the Scoreduino-B board:

On the left side:

  • 9V: This is to power up RED colored 2.3″ displays. We get this voltage from the voltage regulator LM78XX.
  • 5V: 5V is used for CD4511 and 74LS192 on the left side
  • GND: GND of SCOREDUINO_B connects with the GND of 2 digits up/down counter
  • A: Send pulse from SCOREDUINO_B via this pin in order to count UP
  • B: Send pulse from SCOREDUINO_B via this pin in order to count down
  • 14: Reset pin. Send pulse to reset the count.

On the right side:

  • V: V depends upon the color of the displays used on the right side. For example, GREEN colored 2.3″ display needs 12V. This is the default supply voltage.
  • 5V: 5V is used for CD4511 and 74LS192 on the right side
  • GND: GND of SCOREDUINO_B connects with the GND of 2 digits up/down counter
  • C: Send pulse from SCOREDUINO_B via this pin in order to count UP
  • D: Send pulse from SCOREDUINO_B via this pin in order to count down
  • 14: Reset pin. Send pulse to reset the count.

See all the images on Flickr

Videos:

  1. 2.3 inch scoreboard.      Watch it on youtube
  2. 3 inch scoreboard.         Watch it on youtube
  3. 4 inch scoreboard.         Watch it on youtube

Package includes:

  1. Fully electronically assembled Scoreboard
  2. Power supply

Share This

Additional information

Display Size

2.3 inches displays(9V), 3 inches displays (12V), 4 inches displays (12V)

You may also like…

  • ‘Scoreduino-A’ Trigger Module For Up and Down Counter Drivers

    US $24.95
    Add to cart

    ‘Scoreduino-A’ Trigger Module For Up and Down Counter Drivers

    US $24.95
    • Arduino based digital controller for up down counters and drivers
    • Programmable with FTDI basic breakout board.
    • Comes with a Bluetooth module and RF remote control.
    • Scoreduino-A communicates with display drivers via Bluetooth or RF signals.
    • It has switches for up, down, and reset commands
    • Works with SCORE1, SCORE2, and SCORE3 modules of Scoreduino app
    • Send specific numbers to displays. For example, if send 387 from the app, the displays will show the exact number.
    Quick View
  • 3″ Common Anode Seven Segment Display Driver

    US $24.95
    Read more

    3″ Common Anode Seven Segment Display Driver

    US $24.95
    • This is a 74LS192 based up and down counter driver module for driving 3″ seven-segment display. The module has headers on two sides to receive up/down count signals and to concatenate with another driver module. You can concatenate unlimited displays.
    • The module can be triggered with NE555, flashing LED, Scoreduino-Abasic trigger module, and Arduino. It can also be triggered by anything that generates a clock pulse.
    • It works with 12V power supply. Do not exceed more than 12V.

    Out of stock

    Quick View
  • SCORE6- 2 teams/players Arduino based 4″ digital scoreboard for table tennis

    US $495.00
    Read more

    SCORE6- 2 teams/players Arduino based 4″ digital scoreboard for table tennis

    US $495.00

    The price of this product is not decided yet. We will finalize the price soon. We are still in the R&D phase.

    • 2 players/teams Arduino based digital Scoreboard with innings display
    • Programmable using FTDI basic breakout board
    • Available in one size: with 4″ displays on two sides and 3″ display in the middle for innings
    • Works with SCORE5 module of Scoreduino app
    • Send specific numbers to the displays using the app
    • Bluetooth is the communication medium between the Scoreboard and app
    • Works with 12V.

    Out of stock

    Quick View
  • 2.3″ Common Anode Seven Segment Display Driver

    US $19.95
    Add to cart

    2.3″ Common Anode Seven Segment Display Driver

    US $19.95
    • This is a 74LS192 based up and down counter driver module for driving 2.3″ seven-segment display. The module has headers on two sides to receive up/down count signals and to concatenate with another driver module. You can concatenate unlimited displays.
    • The module can be triggered with NE555, flashing LED, Scoreduino-Abasic trigger module, and Arduino. It can also be triggered by anything that generates a clock pulse.
    • It works ‘strictly’ with 9V power supply. Do not exceed more than 9V.

    9 in stock

    Quick View
  • SCORE5- 2 teams/players Arduino based 4″ digital scoreboard with innings display

    US $495.00
    Read more

    SCORE5- 2 teams/players Arduino based 4″ digital scoreboard with innings display

    US $495.00

    The price of this product is not decided yet. We will finalize the price soon. We are still in the R&D phase.

    • 2 players/teams Arduino based digital Scoreboard with innings display
    • Programmable using FTDI basic breakout board
    • Available in one size: with 4″ displays on two sides and 3″ display in the middle for innings
    • Works with SCORE5 module of Scoreduino app
    • Send specific numbers to the displays using the app
    • Bluetooth is the communication medium between the Scoreboard and app
    • Works with 12V.

    Out of stock

    Quick View
  • 1.2″ Common Anode Seven Segment Display Driver

    US $14.95
    Add to cart

    1.2″ Common Anode Seven Segment Display Driver

    US $14.95
    • This is a 74LS192 based up and down counter driver module for driving 1.2″ seven-segment display. The module has headers on two sides to receive up/down count signals and to concatenate with another driver module. You can concatenate unlimited displays.
    • The module can be triggered with NE555, flashing LED, Scoreduino-Abasic trigger module, and Arduino. It can also be triggered by anything that generates a clock pulse.
    • It works with 5V.

    5 in stock

    Quick View
  • Basic trigger module for up down Scoreduino counters

    US $14.95
    Add to cart

    Basic trigger module for up down Scoreduino counters

    US $14.95
    • Basic trigger module for operating up/down counters
    • Works with common anode seven segment display drivers only
    • Up, down and reset switches.
    • Voltage range: 5V-20V. For example, 5V for 1.2″ driver and 20V for 5″ GREEN common anode display
    • Concatenate as many displays as you want.

    27 in stock

    Quick View
  • Android app and RF remote controlled 3 digits common anode up and down counter

    US $39.95US $49.95
    Select options

    Android app and RF remote controlled 3 digits common anode up and down counter

    US $39.95US $49.95

    The price of this product is not decided yet. We will finalize the price soon. We are still in the R&D phase.

    • 74LS192 based 3 digits digital up-down counter
    • Available in two sizes: 2.3″ and 3″ displays
    • Control with SCORE3 module of the Scoreduino Android App
    • Control with 4CH RF remote control
    • Programmable with FTDI basic breakout board
    • 2.3″ counter works with 9V and 3″ counter works with 12V.
    Clear
    Quick View
  • 5″ Common Anode Seven Segment Display Driver

    US $39.95
    Read more

    5″ Common Anode Seven Segment Display Driver

    US $39.95
    • This is a 74LS192 based up and down counter driver module for driving 5″ seven-segment display. The module has headers on two sides to receive up/down count signals and to concatenate with another driver module. You can concatenate unlimited displays.
    • The module can be triggered with NE555, flashing LED, Scoreduino-Abasic trigger module, and Arduino. It can also be triggered by anything that generates a clock pulse.
    • It works with 15V power supply. Do not exceed more than 15V.

    Out of stock

    Quick View
  • 4″ Common Anode Seven Segment Display Driver

    US $29.95
    Read more

    4″ Common Anode Seven Segment Display Driver

    US $29.95
    • This is a 74LS192 based up and down counter driver module for driving 4″ seven-segment display. The module has headers on two sides to receive up/down count signals and to concatenate with another driver module. You can concatenate unlimited displays.
    • The module can be triggered with NE555, flashing LED, Scoreduino-Abasic trigger module, and Arduino. It can also be triggered by anything that generates a clock pulse.
    • It works with 12V power supply. Do not exceed more than 12V.

    Out of stock

    Quick View