DIY KIT 41- TDA2030A Electronic Mono Audio Power Amplifier Board

TDA2030A is widely used as a Hi-Fi audio amplifier in computer speakers.
It has the current limiter as well as thermal shutdown functions.

Specifications:
Output Power: Maximum 18W
Supply Voltage: DC 9V-24V (recommended DC 12V, this voltage to the heat sink requirements are very low.

The maximum supply of this board is actually up to 40V, but you need to change the board’s electrolytic capacitor C1. The capacitor voltage value should be higher than the supply voltage.
Static Current: about 25mA (disconnect to tone, connect to 8Ω speaker, 12V power supply)
Speaker Impedance: 4Ω-8Ω
Total harmonic distortion: THD 0.08%(Po=0.1 to 14W,RL=4Ω)
SNR: 94dB-106dB(1W-15W)
Heat: The higher the supply voltage, the higher the heat is generated.

Schematic:

Check out all the images to get tips for assembly. You can see all the images on Flickr also.

Other images of the kit

DIY KIT 40 – TDA2822M Audio Amplifier DIY Kit

AMP-1 amplifier uses TDA2822M  as an amplifier chip. This chip is STMicroelectronics (ST) developed dual-channel monolithic power amplifier IC, usually used in the pocket cassette player (WALKMAN), tape recorders and multimedia speaker for the audio amplifier. It has a simple circuit, produces good sound quality, it has a wide voltage range and other characteristics that can work in stereo and bridge amplification (BTL) circuit form. (more…)

Search for products

Back to Top
Product has been added to your cart