NOTE: This is an infrared-based kit, NOT Bluetooth based.
This IR kit includes a TSA1200 module, an IR remote controller and also a connection cable. It can work with those audio amplifier boards which have BVC ports. For example, all the audio amplifiers listed on this page.
After connecting the TSA1200 to the audio amplifier board BVC port, users can use the IR controller to control the audio volume +/- and forward/rewind the music or play/pause the music.
There are 5 buttons on the board. Users can control the audio amplifier board by pressing these real buttons. Users can also connect their own external buttons to the TSA1200 kit. All the 5 buttons share the same GND pin.
NOTE: All the international shipping methods (including Australia) can’t contain the battery in the package. We remove the IR controller cell battery. You need to buy a CR2025 cell battery for the IR controller.
The IR controller needs to pair with the TSA1200 board before use it. We would pair them before shipping them out.
Just in case, if it is not paired and you need to pair it up again, here are the steps:
- Long-press one of the buttons. The working state LED will flash slowly.
- Press the corresponding button on the IR controller. The working state LED will flash fast blinking for 1 second and gets stable (no flashing).
- Pair the next button.
- Size: 6.6cm x 3.8cm
- IR audio control
- External buttons port
- Working voltage: DC 5V