Two digits – Digital object counter DIY kit is one of the most popular kits designed by BuildCircuit. The kit is very popular among electronics beginners and intermediate circuit players.
We are now releasing the upgraded version of the kit, a three-digit digital object counter DIY kit.
The DIY digital object counter works with TSOP4838 infrared receiver and there are three seven segment displays displaying numbers from 0 to 999. An IR transmitter is oriented towards the TSOP4838 infrared receiver of counter module and objects are moved between the counter and transmitter modules. Each time an object passes between the two modules, the seven segment displays show increment in numbers.
The counter module can be reset to 000 at any time and restart the counting.
Watch the video below:
The counter can be reset to 000 by pressing the reset switch. The counter does not count if the IR rays are continuously falling on the Infrared sensor(TSOP4838). As soon as an object obstructs the IR signal, the counter immediately counts the interruption.
The maximum distance between the counter module and the IR transmitter should be around 1 meter.
The module can also be tested with general remote control. Thus, you can also call it as a simple remote tester. For each press on your remote control, there is increment in number. However, we cannot guarantee that it works with ALL the TV/DVD/VCD remote controls.
Power supply: The counter works with a 9V battery and the IR transmitter works from 6V to 9V.
Schematic of counter module:
Schematic of IR transmitter module:
IR transmitter is based on astable mode of 555 timer. The 555 timer, resistors and capacitor on the transmitter module output IR rays at 37.974Khz(approximately 38Khz). The TSOP4838 infrared module operates at 38KHz infrared frequency, however, that is not so strict with these kinds of basic experiments. It actually operates at frequencies between 30Khz to 40Khz.
Use astable mode frequency calculator for finding out the frequency of 555 timer. While using the online calculator, enter R1=18K, R2=10K and C1= 0.001uF, you will get 37.974 KHz.
How to use the kit
Place the two kits facing each other in a straight line. The IR receiver TSOP4838 (on the counter module) and the IR LED(on the transmitter module) should be kept in a line of sight(straight line). When you move an object in between the two kits, the counter module counts the number of interruptions in the line of sight.
Watch the video below to know how to use the kits
Other related tutorials:
3 Digit Digital Object Counter ASSEMBLED Kit With Laser ModuleUS $14.95Add to cart
3 Digit Digital Object Counter ASSEMBLED Kit With Laser ModuleUS $14.95
This is 3 digits digital object counter kit for electronics beginners and hobbyists. It is the upgraded version of our previous 2 digits and 3 digits object counter.
You can use this 3 digits digital object counter for counting objects or people entering in a room. It can be used by engineers for learning about digital counters.
This DIY digital object counter works with VS1838 infrared receiver and photoresistor and there are three seven segment displays displaying numbers from 0 to 999. An IR transmitter is directed towards the VS1838 infrared receiver of the counter module and objects are moved between the two modules. Each time an object passes between the two modules, the seven-segment displays show increment in numbers from 0 to 999.
48 in stock
Check out all the counters
1.8″ Photoresistor And Laser Operated Medium Digital Objects CounterUS $24.95Add to cart
2.3″ Common Anode Seven Segment Display DriverUS $19.95Add to cart
2.3″ Common Anode Seven Segment Display DriverUS $19.95
- This is a 74LS192 based up and down counter driver module for driving 2.3″ seven-segment display. The module has headers on two sides to receive up/down count signals and to concatenate with another driver module. You can concatenate unlimited displays.
- The module can be triggered with NE555, flashing LED, Scoreduino-A, basic trigger module, and Arduino. It can also be triggered by anything that generates a clock pulse.
- It works ‘strictly’ with 9V power supply. Do not exceed more than 9V.
9 in stock
2.3″ common cathode seven segment display driverUS $11.95 – US $12.95Select options
2.3″ common cathode seven segment display driverUS $11.95 – US $12.95
This is a CD4026 based up counter driver module for driving 2.3 inches common cathode seven segment display. The module has headers on two sides to receive up count signals and to concatenate with another driver module.
The module can be triggered with NE555, flashing LED, and Arduino. It can also be triggered by anything that generates a clock pulse.
CD4026- 1 Digit Up Counter ModuleUS $4.95Add to cart
CD4026- 1 Digit Up Counter ModuleUS $4.95
- It works as an UP counter. You can instantly test the up count of the display using a flashing LED.
- It is a handy tester for 0.56″ seven segments common cathode display.
- Works with Arduino or NE55 or whatever that gives pulse.
- You can concatenate as many displays as you want.
- With this, you can build your own digital objects counter.
- Size: 15mmx49mm
46 in stock
CD4029 Based Up And Down Counter For Arduino And NE555US $7.95Add to cart
Photoresistor And Laser Operated Large Digital Objects Counter With 2.3″ DisplaysUS $29.95Read more
Photoresistor And Laser Operated Large Digital Objects Counter With 2.3″ DisplaysUS $29.95
A laser light module illuminates the photoresistor continuously and whenever any object obstructs the laser light falling on the photoresistor, the counter increases the count. You can use this 3 digit digital objects counter for counting objects or people entering a room. It can be used by engineers for learning about digital counters.
Out of stock