DIY KIT 46- Metal detector DIY electronic kit

This is yet another metal detector kit for electronics beginners. After assembling the kit, if you take the kit close to a metal, the buzzer will turn on and the LED will flash. The sensitivity of the kit can be adjusted using the potentiometer.

Parameters:
NO. Parameters Value
1 Name Metal detector
2 Operating voltage DC 3-5V
3 Operating current ≤ 40mA
4 Standby current ≤ 5mA
5 Detection depth ≤ 60mm
6 Detection and alarm mode Sound and Light
7 The difficulty of soldering Easy
8 Circuit board size 86*61mm
9 Packing weight 16g/kit

Component list:

NO. PCB Marker Component Name Parameter QTY
1 R3 RES 470R 1
2 R2 RES 2K 1
3 R1 RES 200K 1
4 VR1 ADJ-RES 100R 1
5 C2.C3 CAP 222P 2
6 C1.C4 CAP 104P 2
7 C5 E-CAP 100UF 1
8 LED1 LED 5mm Red 1
9 Q2.Q3 Transistor S9012 2
10 Q1 Transistor S9018 1
11 SW1 Power SW 1
12 SP1 Buzzer 9*12 1
13 J1 Power-Socket KF301-2 1
14 —— PCB MDS-60 1
15 Choose Battery box AA1.5V*3 1

Schematic of the kit:

Click on the images below to see all the assembly steps. You can also see the images on Flickr.

Check out all the images below

Documentation:

MDS-60-Metal-detector-kit

DIY KIT 45- Metal Detector Electronic Kit

This is a simple metal sensor DIY electronic kit for electronics beginners. Use 3V-5V battery and take metal to its proximity, it will activate the buzzer. The kit can detect metals up to 5cm.

Kit parameters:
Supply voltage: 3-5V
Dimensions: 66 * 61MM
Maximum detection range: 5CM

The schematic of the kit is given below:You can see the images below to get tips for assembling the kit. You can find all the images on Flickr also.

Check out these product images also

Search for products

Back to Top
Product has been added to your cart