NOTE: A similar kit is available at buildcircuit store. Please check the store. An infrared based music transmitter and receiver is made up of three different modules. Test these three modules before you make this project. An audio amplifier Dark sensor using 741 Melody generator using UM66 You can make this project using phototransistor as…
Description: An RC circuit is used to introduce time delay in circuits. A combination of resistor and capacitor gives a time constant. The following circuit shows a basic RC circuit. In the figure C1(100uF) works as a storage capacitor. When you press the switch, the capacitor charges quickly and provides base current to the transistor…
MAKE A SIMPLE DIGITAL OBJECT COUNTER WITH THIS MODULE- CLICK HERE Description: It’s a simple counter module. In the example, we have used 4026B and common cathode seven segment display. In place of 4026B, you can also use 7490 and 7447.Â
Description: You can make an up counter using a counter module and a multivibrator module. First make a simple multivibrator, then make a counter and then combine them.Â
An up counter simply counts from 0 to 9. We can use this circuit to make digital object counter. This circuit can also be used to make a digital clock.
555 timer configured in monostable mode is a simple automatic dark sensor circuit that gives output when light falling on LDR is blocked.
To make an object counter we can use a simple dark detector circuit and a normal calculator. Pole and NO (Normally Open) terminals of a relay have to be connected to the two pins which are used to activate ‘=’ key of calculator.
As we block the light falling on LDR, the calculator starts counting.
For the calculator to work as a counter, we first need to press ‘1’ and ‘+’ keys.
