Click here to go to assembly page of infrared receiver. You will get these components with infrared transmitter kit: 1 x PCB 1 x Earphone Jack female 1 x Infrared LED 1 x 100uF electrolytic capacitor 1 x 4.7uF electrolytic capacitor 1 x S8050 transistor 1 x 5mm LED 1 x 0.01uF ceramic capacitor- Code:…
This is a MAX7456 OSD ( On Screen Display) shield for Arduino. The user can easily interrupt and overlay text and/or graphics onto a video signal (PAL or NTSC). It’s just about “plug-and-play” with an Arduino board. Plug this shield over Arduino main board and upload the given test sketch. Plug in your video signal to…
See page 1 Remaining part of assembly of line following robot… Fix the nut bolt set on the PCB Solder the photo resistor/LDR as shown on the image.Make sure that the LDR is at least 5mm above the ground or spot where you are placing the robot. Solder the transparent 5mm LEDs. The LEDs should…
The assembly of a line following robot is pretty straight forward. If you follow the silkscreen labels, you will be able to assemble it easily. The line following robot comes with the components as shown on the image. Start with resistors Solder all the resistors that comes with the package. Solder the transistors S8550 Solder…
Delivery to USA, Canada, UK and Germany: 7-10 days Read about shipping and delivery
