This page shows you how to assemble three digit digital object counter. If you are looking for 2 digit digital object counter please see this page.
If you are interested in knowing about this 3 digit counter, please check this page.
The counter module kit package comes with all the components required to build your kit. Before you proceed, please check if you have all the required components:
- 1 x TO-92 5V Voltage Regulator(78L05)
- 3 x CD4026 Decade counter
- 3 x 16-pin IC socket.
- 3 x common cathode seven segment display-(Can be in red, yellow and blue colors)
- 1 x TSOP4838 Infrared sensor
- 1 x 100uF Capacitor- (Voltage rating can be between 16V to 50V- causes no problem in operation)
- 2 x 0.1uF 50V ceramic Capacitor
- 2 x 3mm LED- (can be any color)
- 1 x BC547
- 1 x BC557
- 1 x SPDT Slide Switch
- 1 x Tactile reset switch
- 1 x Screw terminal- (can be in blue/green colors)
- 4 x 1K Ohm Resistor 1/4W
- 1 x 330R Resistor 1/4W
- 1 x 10K Ohm Resistor 1/4W
- 1 x Bare PCB with Silkscreen Indicators
- 1 x 9V battery connector
Please follow the following steps:
Step 1: Solder 1K Ohm resistors. The color code of 1K ohm resistor is Brown-Black-Red
Click on the image to see the color code more clearly.
Step 2: Solder 10K Ohm resistor and 330 Ohm resistors. The color code for 10K Ohm resistor is Brown- Black- Orange and color code of 330 Ohm resistor is Orange-Orange-Brown.
Step 3: Solder 2pcs 0.1uF (code- 104) capacitors.
Step 4: Solder 2pcs 3mm LED. If you do not know which pin is Anode and which is cathode, please see this. The longer pin is Anode and the shorter pin is Cathode.
Step 5: Solder tactile switch. The switch is for resetting the counter. You can see how it work on the video below.
Step 6: Solder BC557 PNP transistor.
Step 7: Solder BC547 NPN transistor
Step 8: Solder 5V voltage regulator. The 5V regulator chip is marked as 78L05. It is in TO-92 package.
Step 9: Solder TSOP4838 infrared sensor.
Step 10: Solder SPDT switch. It is used for switching ON/OFF the counter module.
Step 11: Solder 2 pin screw terminal. It is used for connecting a 9V battery to the counter module.
Step 12: Solder 3pcs of 16 pin DIL sockets. These are used for stacking CD4026 chips.
Step 13: Solder three seven segment displays and 100uF Capacitor. Please notice the + and – terminal of the capacitor. Solder it correctly.
Step 14: Put CD4026 chips over the DIL sockets.
Step 15: Use a 9V battery to operate the kit. Your kit is now ready to use.
3 Digit Digital Object Counter ASSEMBLED Kit With Infrared Transmitter And Laser ModuleUS $14.95151 items soldAdd to cart
3 Digit Digital Object Counter ASSEMBLED Kit With Infrared Transmitter And Laser ModuleUS $14.95151 items sold
This is 3 digits digital object counter kit for electronics beginners and hobbyists. It is the upgraded version of our previous 2 digits and 3 digits object counter.
You can use this 3 digits digital object counter for counting objects or people entering in a room. It can be used by engineers for learning about digital counters.
This DIY digital object counter works with VS1838 infrared receiver and photoresistor and there are three seven segment displays displaying numbers from 0 to 999. An IR transmitter is directed towards the VS1838 infrared receiver of the counter module and objects are moved between the two modules. Each time an object passes between the two modules, the seven-segment displays show increment in numbers from 0 to 999.
39 in stock
Check out all the counters
1.8″ Photoresistor And Laser Operated Medium Digital Objects CounterUS $19.9513 items soldAdd to cart
2.3″ Common Anode Seven Segment Display DriverUS $19.958 items soldAdd to cart
2.3″ Common Anode Seven Segment Display DriverUS $19.958 items sold
- This is a 74LS192 based up and down counter driver module for driving 2.3″ seven-segment display. The module has headers on two sides to receive up/down count signals and to concatenate with another driver module. You can concatenate unlimited displays.
- The module can be triggered with NE555, flashing LED, Scoreduino-A, basic trigger module, and Arduino. It can also be triggered by anything that generates a clock pulse.
- It works ‘strictly’ with 9V power supply. Do not exceed more than 9V.
10 in stock
2.3″ common cathode seven segment display driverUS $11.95 – US $12.9522 items soldSelect options
2.3″ common cathode seven segment display driverUS $11.95 – US $12.9522 items sold
This is a CD4026 based up counter driver module for driving 2.3 inches common cathode seven segment display. The module has headers on two sides to receive up count signals and to concatenate with another driver module.
The module can be triggered with NE555, flashing LED, and Arduino. It can also be triggered by anything that generates a clock pulse.
CD4026- 1 Digit Up Counter ModuleUS $4.9565 items soldAdd to cart
CD4026- 1 Digit Up Counter ModuleUS $4.9565 items sold
- It works as an UP counter. You can instantly test the up count of the display using a flashing LED.
- It is a handy tester for 0.56″ seven segments common cathode display.
- Works with Arduino or NE55 or whatever that gives pulse.
- You can concatenate as many displays as you want.
- With this, you can build your own digital objects counter.
- Size: 15mmx49mm
50 in stock
CD4029 Based Up And Down Counter For Arduino And NE555US $7.9521 items soldAdd to cart
Photoresistor And Laser Operated Large Digital Objects Counter With 2.3″ DisplaysUS $29.959 items soldAdd to cart
Photoresistor And Laser Operated Large Digital Objects Counter With 2.3″ DisplaysUS $29.959 items sold
A laser light module illuminates the photoresistor continuously and whenever any object obstructs the laser light falling on the photoresistor, the counter increases the count. You can use this 3 digit digital objects counter for counting objects or people entering a room. It can be used by engineers for learning about digital counters.
4 in stock